Art Fair Insiders

Call for Artists, Making Money at Juried Art Fairs, Craft Shows and Festivals

Part 2: Looking ahead to future shows and musing about problems to overcome

I have thought seriously about what it is going to look like when they finally let us exhibit again in the Covid era.

I am a photographer. So presently I show my work in framed images on the wall and then a table with two matted print bins and a small table with a box for my 16x20 mats. 

The two bin table hold 8x10 mats and 11x14 mats.  I print on paper.

I have Lightdome tent with Propanels.

My booth usually has two skinny panels in the front where I display six, 16x20 frames.

I have a left and right wall and two rear walls with an opening in the middle where I sit behind the booth.

The print bins are aligned on one side.

Covid is going to change things. I do not think I can have print bins where people will be touching them constantly. I cannot be wiping all the time.

Most 2-d artists like me who have bins are going to have to circumvent this problem.

Here is my solution.

I sell about 50 images in three matted sizes.

I am going to have two large frames with 5x7 printed images with titles.

The frames will be 30x40, with glass,each frame will have 25 images.

I am going to duplicate the process on the outside panels of my booth— two frames with 25 images.

That means at least four people or more can look at the work.

I will have a small coffee table with three sample size mats so people can see what they will get.

I will have prices for the three sizes. These will show on the framed pieces as well as the table.

Then, when a customer sees one they like and want, I can pull one out from my storage bins behind the booth.

I can hold it up to let them see without touching.  If it goes well, I will bag it up for them.

This eliminates other people touching the work

It is safe, no germs getting spread.

I think people will adjust to this new reality.

Next, let us talk about vibing with customers safely.

I am going to clip a 30x40 plexiglass sheet to the panel’s edge in the middle where I sit.

It will be head high.  That way there is a safe shield between us.

This allows me to duck under if I have to go out in the booth.

Customers can hand me their cards or cash below it.  I can pass bagged sales under it.

Again this is a layer of safety, yes I will wear a mask.

In my next blog I will cover other future obstacles to be overcome in the near future. Example, how booths will be spaced at shows.

I hope this will be of help to all of you.  And, please give me some feedback, love to hear your thoughts.

Later Gators, til tomorrow.

Views: 1043


You need to be a member of Art Fair Insiders to add comments!

Join Art Fair Insiders

Comment by Connie Mettler on June 17, 2020 at 11:26am

Hi Jane. I know, pretty tricky. There was a post on here in May with some ideas for jewelers, maybe not looking at this directly, but perhaps helpful:

Comment by Jane Shaffer on June 17, 2020 at 11:12am

Great ideas! Any suggestions for a jeweler?  I know I could put it all in a bag, but customers like to touch it and try it on before they buy it.

Comment by Connie Mettler on June 17, 2020 at 11:02am

That's good too, Mark. When we started doing art fairs Norm created a quadrant that stood in the middle of the booth so people could circulate around it ... then a browse bin/table near the front. The fairs weren't as stringent on backup/storage at that time, so we just piled that on the curb with a tarp over it. Something like that might work in today's climate also.

Comment by Mark Zirinsky on June 17, 2020 at 9:31am

My ideal booth setup is where it is open on all 4 sides,  I can show work on the inside and outside surfaces, so i effectively have 3 outside and 3 inside surfaces, 10' long each. so, effectively 60' of wall space. When I have to set up with only a open front, without using any of the outside surfaces then I only have the inside surfaces so effectively only 30' of wall space.

The idea has not occurred to me yet how to do a plexiglass shield, or if this is even practical. Especially when I only have the 3 inside surfaces ,  do I lose a complete corner so I can barricade myself in there? 

Since we haven't actually had a show yet, haven't seen what other ideas people have come up with for how to lay out the booth.

Two shows coming up in September, Main St Ft Worth, and Deep Ellum (also Ft Worth), their booth layout still shows as booths next to each other; I do not know if they are planning on spacing out between the booths

Comment by Connie Mettler on June 16, 2020 at 12:31pm

The idea of having work in back to bring out for interested customers is a good one. One of my favorite sales "techniques" once upon a time, was, "yes, that is a nice size, but let me show you it in a larger size, framed, to see if that will work for you." Then I whipped to the storage area and pulled it out and sealed the sale. Yes, you can do this. So many artists have way too much work in their booths anyway that it makes it hard for customers to decide. You have to help. 

The people who come to the shows, wearing masks, will be glad to see you and be eager for the interaction. As word gets around about all the precautions in place I hope we will see decent audiences at the events. And, if the crowds are smaller, it makes the parking easier, and people who don't like to be in crowds or inconvenienced by others, may start showing up. Hoping, hoping.

Fiber artists -- use this resource to find new buyers:  Advertise with Reach over 60,000 fiber arts lovers.

Our 50 Best Art Fairs

Look Inside the 2018 Art Fair Survey:
Who Won and Why

Join the MasterMinds Group for personalized coaching on your Internet Lifestyle Business! 

60 Page Report - Best US Art Fairs

Click Here to
Learn More


  • Add Photos
  • View All

© 2021   Created by Connie Mettler.   Powered by

Badges  |  Report an Issue  |  Terms of Service