Art Fair Insiders

Call for Artists, Making Money at Juried Art Fairs, Craft Shows and Festivals

I have a large metal print that is mounted by a bracket that screws into a wall. Am I able to screw the bracket into pro panels?

Views: 114

Reply to This

Replies to This Discussion

Pro Panels are carpet over Styrofoam. What you need to do is create your own heavy duty strap hangers that go over the top of the panels.

Larry Berman
http://BermanGraphics.com
412-401-8100

Another option might be to use the appropriate size piece of 1/2" plywood mounted onto the straps. Then you could use the French cleat (Hangman system).

Note : I have 2D wall art that is a bit too heavy for standard pro panels. The solution for me was to make my own pro panels. I used two sheets of 3/8" plywood cut to the needed dimensions. Between the plywood are spacers and basic metal conduit (@ Home Depot) for legs. The folks at pro panels supplied the feet and tent hooks. I did have to outsource custom made corner and in-line panel joiners...that was kinda easy for a pro metal fab shop. The fabric to wrap the panels did get kinda pricey. All in all, I have about the same investment as stock pro panels. And the weight of the combined panels acts as it's own anchor to terra firma. Love em...a tad bit heavy, so I'll probably hate em in ten years.

RSS

Fiber artists -- use this resource to find new buyers:  Advertise with Sweaterbabe.com. Reach over 60,000 fiber arts lovers.

Our 50 Best Art Fairs


Look Inside the 2018 Art Fair Survey:
Who Won and Why

Join the MasterMinds Group for personalized coaching on your Internet Lifestyle Business! 

60 Page Report - Best US Art Fairs

Click Here to
Learn More

Photos

  • Add Photos
  • View All

© 2020   Created by Connie Mettler.   Powered by

Badges  |  Report an Issue  |  Terms of Service