Finishing artwork?...

I started drawing/painting again this past February after a 30 year pause in action... so I'm still relearning/learning/stumbling. Done one show and did 10x better than I expected. However, in the last 2 weeks I got time to take pics of artwork and build a quicky-WIX site. The feeling I got when i picked up each piece to photo was that the artwork itself seems unfinished & rough.. if that makes sense. Dull maybe? I think I'm equating quality with some level of glossiness... like walking around a museum - every painting has some level of gloss to it (artifact of oil and varnishes?)...

So am I wondering about something that makes no difference - or should I spray/varnish/something my finished pieces. All my pieces are done on heavy-weight cold or hard pressed water color paper. 

Rick Wallace

RICKscrib.com

You need to be a member of Art Fair Insiders to add comments!

Join Art Fair Insiders

Votes: 0
Email me when people reply –

Replies

  • I haven't had a problem with this using the Krylon UV spray, but I have experienced this with other brands. I think its because some of the other brands go on heavier.
    • thanks,  Maybe I have a bad can because it was the Krylon brand, It ruined a piece I'd spent weeks on.  Sigh.

  • Do you spray it on the acrylics or brush it on?  Any recommendations for what to use?  How about on oil paintings?

    • An oil painting should always be varnished. I like to use Gamblin Gamvar because it can be safely applied as soon as the painting is dry and firm to touch (no curing period).

      • Thanks.  Any application suggestions?

        • Always brushed on.

          • Again, thanks.

            • How do you keep the spray from dripping or splotching?  I've used this on my charcoals and sometimes it works fine but other times it leaves large spots and has ruined pieces.  I'm spraying outdoors in a protected area with the piece upright and light passes with the spray.

    • I can't speak to finishing the oil paintings, as I don't use that medium.  However, for water-based mediums there are a great number of good products.  Krylon makes a non-yellowing clear coat acrylic spray in both a gloss and a matte finish, and this product works well for both acrylic and watercolor paintings.  If you want a nice gloss finish on a canvas acrylic painting, you can also brush on acrylic gel medium, which is made by a lot of different companies.  I have used the Liquitex brand with success on a few of my paintings.  The gel medium is thicker than the spray, and will leave a nice glossy finish. I have also used the gel medium to "mat" watercolors to other surfaces, such as wood plaques.  However, your watercolor must be sealed well with the spray acrylic first, otherwise the gel medium will cause the paint to reactivate and smear!

      • that solves the issue I had the first time I tried! one of my "best" pieces I sprayed with a can recommended to me at an Lobby of Hobbys and a lot of color migrated. Thank you!

This reply was deleted.